What are The Precautions for The Disassembly and Assembly of The Aluminum Box ?

With The Rapid Development Of Electronic Products, The Aluminum Box Is Used As a Protective Packaging For Electronic Products, And The Types Of Materials Are Also Very Wide. The Most Popular One Is The Aluminum Electronic Enclosures, Which Is Based On The Conventional Titanium Plating Process. The Profile Process Is To Place The Activated Plated Parts In An Aqueous Solution Of Salt And Hydrochloric Acid For Chemical Treatment; It Can Be Processed Into Various Types Of Gold, Color, Black And Other Bright Series Of Aluminum Profile Products. So What Are The Precautions For Disassembling And Assembling The Outdoor Enclosure For Electronics?

1. The Internal Wiring Of The Winding And The Welding Point Of The Centrifugal Switch Must Not Be Mistaken Or Disconnected.

2. It Is Not Allowed To Break The Winding Insulation, Protect The Action Gap Of The Centrifugal Switch, And Ensure That Its Contacts Operate Normally. When The Contacts Have Spark Burns, They Can Be Lightly Polished With a Fine Rag.

3. Attention Should Be Paid To Avoid Heavy Blows To The Motor With Aluminum Profile Housing, Protect The End Face Of The Motor With Aluminum Profile Housing, And Do Not Damage The Heat Dissipation Ribs On The Casing And End Cover To Maintain Good Heat Dissipation Conditions. The Fan Blades Must Not Be Bent Or Broken, And The Bearings And Rotating Shafts Must Not Have Mechanical Damage. When Storing The Motor With Aluminum Electronic Enclosures, It Should Be Placed In a Ventilated And Dry Place.

4. It Is Necessary To Ensure That The Aluminum Project Boxes Motor Is Moisture-Proof And Well Ventilated, And The Outlet Box  And Capacitors Cannot Enter The Water, And There Can Be No Mechanical Damage. The Air Shelter Of The Hood Should Not Be Blocked, And The Aluminum Electronic Enclosures Motor Housing Should Be Well Grounded. When The Capacitor Is Damaged And Updated, The Voltage Value Of The New Capacitor Should Not Be Lower Than The Voltage Value Of The Old Capacitor, And It Is Best To Do The Same.

The Above Precautions Regarding The Disassembly And Assembly Of The Aluminum Enclosure Are Shared Here. In Addition, The Extruded Aluminum Enclosure Box Shall Not Be Rubbed, Pulled, Stacked, Jammed, Or Entangled With Each Other During The Process Of Reclaiming, Moving And Stretching, And Should Be Reserved For Each Other. a Certain Interval. The Aluminum Alloy Profiles That Are Easy To Bend And Have a Short Discharge Length Should Be Disposed Of In Time, And Maintenance Should Be Done When Necessary.