When choosing the enclosure of electronic products, aluminum project box is often chosen because of its unique advantages, and with the rapid development of science and technology, the technological requirements for aluminium enclosure box are getting higher and higher, why?

First of all, the production process can only be completed with a high level of operating technology. It is easy to cause concentrated small holes in the production process. When such a situation occurs, it is necessary to reduce or even eliminate the small holes in time.

In addition, in the process of pouring, there will be a process of secondary oxidation, which is easy to cause residues left in the inside, so in these aspects, we have done a good job, so that the custom aluminum enclosure is technically and technologically. , have reached the top.

Secondly, during the pouring process, great attention is paid to the pouring temperature and method. On the premise of ensuring the forming, the temperature should be kept as low as possible. However, in order to match the corresponding properties of the aluminium electrical enclosure, the general temperature will be selected at 600 degrees Celsius. to seven hundred degrees Celsius. This guarantees the perfect workmanship of the extruded aluminum box.

The above reasons for the higher and higher technical requirements of the aluminium extrusion box process are shared here. Therefore, the current and future development direction of the aluminium box enclosure must be based on the guarantee technology, and the development of the technology, the requirements for the technology are also constant. improvement. In order to make the production of customers more perfect, YONGUCASE specially builds a craft factory to achieve the ultimate quality and zero defects, and can only be shipped after passing the quality inspection. Contact us for free samples and enclosure solutions.

Aluminum Junction Box Collection

View all
Aluminum Profile Enclosure 76W35H - Yongu Case
Aluminum Profile Enclosure 76W35H - Yongu Case
Aluminum Profile Enclosure 76W35H
$6.00
Extruded Aluminium Box 194W61.5H Yongu Case
Extruded Aluminium Box 194W61.5H Yongu Case
Extruded Aluminium Box 194W61.5H
$6.00
Pcb Mounting Enclosures 142W53.5H - Yongu Case
Pcb Mounting Enclosures 142W53.5H - Yongu Case
Pcb Mounting Enclosures 142W53.5H
$6.00
Aluminium Extrusion Enclosure 52W38H Yongu Case
Aluminium Extrusion Enclosure 52W38H Yongu Case
Aluminium Extrusion Enclosure 52W38H
$6.00
Aluminum Project Enclosure 52W34H Yongu Case
Aluminum Project Enclosure 52W34H Yongu Case
Aluminum Project Enclosure 52W34H
$6.00

Contact us

yongucase is an electronic device enclosure manufacturer with 18 years of experience, with one-stop enclosure solutions. Contact us for free samples and industrial design services!

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.