Common Problems In Aluminum Alloy Enclosure Production

With the current demand for lightweight in many markets, aluminum alloy has become the first choice of more and more component manufacturers. At the same time, the processing of aluminum alloy products has also attracted much attention, and aluminum alloy enclosure is one of them. However, the aluminum alloy enclosure will always encounter some problems and defects in the production process. The following is a brief analysis of how to deal with these common problems.

1.burr treatment

Burrs and burrs often occur in the processing of aluminum alloy enclosures. Various sharp edges and irregular burrs will appear at the edges or transitions. This situation not only affects the appearance of the aluminum alloy housing, but also is very easy to apply. Hurt your hand. In order to improve the quality of aluminum alloy housings, manufacturers will use polishing to remove burrs. Simple cases can be removed manually, and complex cases need to be improved by using special machines.maybe it can be solved by cnc milling.

Although the aluminum alloy enclosure has high hardness, it is easy to be scratched in the production process. This situation may be caused by the friction of molds, machines, transportation rails, sundries, etc., or even during the transportation process.pay attention to the mounting holes caused by improper operation. Scratched aluminum alloy enclosures cannot be regarded as finished products or high-quality products, and special treatment is required at this time. Fine scratches can be treated by polishing and wire drawing, and serious scratches need to be covered by electroplating. A more common one is a metal plating layer. Or an oxide layer.

2. Stain treatment

When the aluminum alloy enclosure is die cast, it is easy to mix dust and sundries,best quality stains on the surface of the aluminum enclosure, or leaving handprints and handprints during transportation. These conditions will affect the appearance and quality of the aluminum enclosure. Therefore, electroplating and anodizing must be used to treat flaws and stains, and it can also enhance the physical properties of the aluminum alloy enclosure, make it more durable, and it is not easy to leave fingerprints and fingerprint processes in later use, and it is easy to clean. Therefore, even if there is no stain on the surface of the aluminum alloy enclosure in the production and processing process, these surface treatment processes need to be adopted to make the aluminum alloy enclosure more perfect.

From the above brief description, it can be seen that the aluminum alloy enclosure processing process is not simple and smooth. In this process, we will still encounter various accidents and problems. Therefore, if we want to make finished products and high-quality housings, we still need to pay more attention and efforts.